Define Schneider
Electric Building - Automation System for your project:
AND-xxxxx model series is for the Continuum System
INV-xxxxx model series is for I/A Series, MicroNet
BACnet System
TAC-xxxxx model series is for the Xenta/Vista
System
AND-XXXXX
= Continuum
system FSCS interface uses Net Controller modules: CX9900-S Series (CX9900-S and
CX9940‑S). Smoke Control panels with this interface will
include the following UL required panel devices. Panel Power
LED, Lamp Test pushbutton, Panel Enable Key Switch (or Security
Door), Audible Alarm, Alarm Silence Key Switch, Comm. Fault LED
and System Fault LED.
INV-XXXXX
= MicroNet BACnet FSCS interface
requires an MNB1000 Controller and uses ModBus Protocol
Interface. Smoke
Control panels with this interface will include the following UL
required panel devices. Panel Power LED, Lamp Test pushbutton,
Panel Enable Key Switch (or Security Door), Audible Alarm, Alarm
Silence Key Switch and System Fault LED. Please provides
MNB-1000 Controller and EMSC-541 Transformer.
TAC-XXXXX =
Xenta and
Vista
system interfaces
to the FSCS via the model "Xenta 913-U8" interface. Smoke
Control panels with this interface will include the following UL
required panel devices. Panel Power LED, Lamp Test
pushbutton, Panel Enable Key Switch (or Security Door), Audible
Alarm, Alarm Silence Pushbutton, Reset Alarm or Faults
Pushbutton, Comms. Fault LED and Equipment Fault LED.
Define Panel
Devices Required
OR
Define
Equipment Controlled for Smoke Control
Number of
LEDS:
Red
Yellow
Green
Blue
Amber
White
Number of
Switches:
Maintained Toggle Switches
2 position
3 position
Rotary Switches (up to 12
positions available)
2 position
3 position
4 position
5 position
Maintained key switch (SPST)
2 position
Number of Other Devices
Lamp Test
Switch
Sonalert
Audible Alarm
Number of Fans
Note: include
stairwell pressurization fans, exhaust fans, make up air fans,
supply air fans, all fans in Air Handling Unit (AHU) used for
Smoke Control
Number of Dampers
Note: include all fire
smoke dampers, motorized dampers used for smoke control, all
dampers in Air Handling Units (AHU) used for smoke control
Number
of Doors/Windows used for Make Up Air
Automation Displays, Inc.
will estimate the number of panel devices required based on your
equipment listed above and building code for your state or city.
Number
of remote inputs from Fire Alarm System-
Fire Alarm system provides dry contact outputs so BMS can
activate a smoke sequence.
Enclosure (select enclosure
size and indicate quantity)
Size (select one)
Mounting Options
(Select One)
Special Options
(Select all that apply)
24"h x 18"w
(in stock)
24"h
x 24"w (in stock)
Surface
Mounted
Floor
Pedestal (for large surface mount enclosures)
